Gauguin Indoor / Outdoor Ceiling Fan
A contemporary tropical style ceiling fan is now available. You, our customers, have repeatedly told us that you needed a really good looking indoor-outdoor fan. That is why we came up with the Gauguin. Enjoy its gentle, cooling breeze! Design: Mark Gajewski, G Squared
GAUGUIN INDOOR / OUTDOOR CEILING FAN SPECIFICATIONS:
52″ diameter blades
3 speeds; reversible
Integrated GU-10 bulb, frost, 500 lumens
Stainless steel hardware and all weather blades
Lifetime warranty on motor, 1 year on rest of fan
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
UL wet location approved for indoor/outdoor use
F581-BG bahama beige with bahama beige blades
F581-WHF flat white with flat white blades
F581-ORB oil rubbed bronze with bahama beige blades
Wall mount touch control included – controls 3 speeds, reverse, plus infinite dimmer for light; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending RF signals to receiver in fan – no need for third wire when wiring for fan
Fan comes standard with 3 1/2″ and 6″ downrods—length to bottom of fan is 16″ with 3 1/2″ downrod and 18 1/2″ with 6″ downrod.
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths.
Airflow 5500 CFM, Energy usage is 52 Watts, Airflow efficiency is 95.4 CFM/Watt on high speed
– Fan with blades as shown in picture
– 3 1/2″and 6″ downrods
– Removable light kit with bulb, GU-10 LED
– Matching cap for non-light use
– Touch control wall switch for on/off, 3 fan speeds plus reverse,
and dimmer for light
– Hugger styles come with downrods plus additional low ceiling adapter
View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.
Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.
Please use this diagram as an approximate guide. Select optional downrods for 9 foot and higher ceilings.
This fan comes with 3 1/2 inch and 6 inch downrods included in the box. These downrods are suitable for 8 foot ceilings.
For safety reasons please be sure that the distance from the floor to the blades is at least 7 feet.
The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.
If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.