Enjoy art… the Cirque ceiling fan, a high performance dynamic sculpture, GOOD DESIGN Award winner. It has very good air-moving performance due to an innovative upsweep of the small blades and a generous pitch of the large blades which coupled with a halogen downlight provide high comfort and low energy consumption. Design: Mark Gajewski, G Squared

×

CIRQUE CEILING FAN SPECIFICATIONS:
54″ diameter major blades and 25″ diameter minor blades
3 speeds; reversible
Integrated GU-10 frost LED bulb, 378 lumens
Lifetime warranty on motor, 1 year on rest of fan
UL listed for indoor use
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
Optional blades: Fan comes with blade finish as shown; optional blades available at additional cost include multicolored (red, yellow, blue), mahogany and translucent

MODELS AVAILABLE:
F596-PN/TL polished nickel with translucent blades
F596-BN brushed nickel with silver blades
F596-BN-MG brushed nickel with mahogany blades
F596-BN-RYB brushed nickel with red/yellow/blue blades

CONTROLS:
Wall mount touch control included – controls 3 speeds, reverse, plus infinite dimmer for light; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending RF signals to receiver in fan – no need for third wire when wiring for fan

DOWNRODS:
Fan comes standard with 4″ and 6″ downrods—length to bottom of fan is 14 1/2″ with 4″ downrod and 16 1/2″ with 6″ downrod.
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths.

ENERGY INFORMATION:
Airflow 6000 CFM, Energy usage is 47 Watts, Airflow efficiency is 127.7 CFM/Watt

Product PDF

×

– Fan with blades as shown in picture
– 4″ and 6″ downrods
– Removable light kit with bulb, GU-10 LED
– Matching cap for non-light use
– Touch control wall switch for on/off, 3 fan speeds plus reverse, and dimmer for light

WCS212

×

Is your ceiling higher than 9ft?


View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.

This fan comes with optional accessories.


Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.

Ready to checkout?


View Cart → Checkout →

×

What's in the box?

STEP 1: SELECT A FINISH

F596L-BN/RYB
Brushed nickel with red yellow blue blades    $619.95
 
F596L-BN/MG
Brushed nickel with mahogany blades    $619.95
 
F596-BN
Brushed nickel with silver blades    $579.95
 
F596-PN/TL
Polished nickel with translucent blades    $579.95
 

Cirque
   

Enjoy art… the Cirque ceiling fan, a high performance dynamic sculpture, GOOD DESIGN Award winner. It has very good air-moving… MORE +

CIRQUE CEILING FAN SPECIFICATIONS: 54" diameter major blades and 25" diameter minor blades 3 speeds; reversible Integrated GU-10 frost LED… MORE +


STEP 2: SELECT DOWNROD FOR YOUR CEILING HEIGHT (?)

Fan comes standard with 4″ and 6″ downrods—length to bottom of fan is 14 1/2″ with 4″ downrod and 16 1/2″ with 6″ downrod.
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths.

downrod_chart

STEP 3: SELECT ACCESSORIES (optional)

Hand Held Remote - $28.00

The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.


Sloped Ceiling Adaptor - $25.00

If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.