The Minka Aire Gilera is the only fan on the market that has the unique appearance of the blades crossing in the middle. The Gilera not only looks great, it moves lots of air as well. You cannot ask for a better fan in this price range.×
GILERA CEILING FAN SPECIFICATIONS:
62″ diameter fan blades
3 speeds; reversible
Lifetime warranty on fan’s motor, 1 year on rest of fan
UL listed for indoor use
Sloped ceilings OK up to 29 degrees without adapter
F733-WH white with white blades
Wall mount touch control included – controls 3 speeds, reverse; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending radio frequency signals to receiver in ceiling fan – no need for third wire when wiring for fan
Fan comes standard with 3 1/2″ and 6″ downrods—length to bottom of fan is 12″ with 3 1/2″ downrod and 14 1/2″ with 6″ downrod.
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths.
Airflow 6417 CFM, Energy usage is 100 Watts, Airflow efficiency is 64.2 CFM/Watt
– Fan with blades
– 3 1/2″ and 6″ downrods
– Touch control wall switch for on/off, 3 fan speeds plus reverse
View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.
Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.
Please use this diagram as an approximate guide. Select optional downrods for 9 foot and higher ceilings.
This fan comes with 3 1/2 inch and 6 inch downrods included in the box. These downrods are suitable for 8 foot ceilings.
For safety reasons please be sure that the distance from the floor to the blades is at least 7 feet.
The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.
If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.