Clean, industrial lines define this powerful and very useful fan. You can control the air movement by letting the fan turn to circulate air throughout the room or stop it in one position for concentrated and directed air flow. The integrated LED fixture provides great light or you can use the included cap for use without a light fixture.×
ELEMENTAL GYRO CEILING FAN SPECIFICATIONS:
42″ total maximum sweep
1000-1500 rpm side fan speeds
Side fan heads independently adjustable
Fan assembly rotates at 3 rpm, rotation can be stopped
Integrated LED light with 17 watt bulb, bulb included
Cap for non-light use included
Lifetime warranty on motor, 1 year on rest of fan, 3 years on LED light bulb
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
UL listed for indoor use
F306L-BS/SL brushed steel finish with silver blades and etched opal glass
F306L-ORB/MM oil rubbed bronze finish with medium maple blades and etched opal glass
Wall mount touch control included – incorporating fully independent fan head and axis rotation speeds plus infinite dimmer for light; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending radio frequency signals to receiver in fan – no need for third wire when wiring for fan
Fan comes standard with 3 1/2″ and 6″ downrods—length to bottom of fan is 20 1/2″ with 3 1/2″ downrod
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths
Airflow 3000 CFM, Energy usage is 45 Watts, Airflow efficiency is 66 CFM/Watt
– Fan with blades as shown in picture
– 3 1/2″ and 6″ downrods
– Removable light kit as shown with bulb, 17 watt LED
– Matching cap for non-light use
– Touch control wall switch for on/off, 3 fan speeds plus reverse,
fan mounting rotation control, and dimmer for light
View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.
Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.
Please use this diagram as an approximate guide. Select optional downrods for 9 foot and higher ceilings.
This fan comes with 3 1/2 inch and 6 inch downrods included in the box. These downrods are suitable for 8 foot ceilings.
For safety reasons please be sure that the distance from the floor to the blades is at least 7 feet.
The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.
If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.