The Airus is both a great fan and light with fully adjustable independent 100W uplight and 150W downlight, with brushed nickel, white or oil rubbed bronze finishes to complement your decor. Design: Mark Gajewski, G Squared×
AIRUS CEILING FAN SPECIFICATIONS:
54″ diameter blades; 14 degree pitch
3 speeds; reversible
Integrated uplight and downlight -100 watt halogen uplight and 150 watt halogen downlight
Uplight and downlight are independently controlled
Lifetime warranty on motor, 1 year on rest of fan
UL listed for indoor use
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
F598-ORB oil rubbed bronze with medium maple blades
F598-BN brushed nickel with silver blades
F598-WH white with white blades
Wall mount touch control included – controls 3 speeds, reverse, plus infinite dimmer for uplight and downlight; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending RF signals to receiver in fan – no need for third wire when wiring for fan
Fan comes standard with 3 1/2″ and 6″ downrods—length to bottom of fan is 13 1/4″ with 3 1/2″ downrod and 15 3/4″ with 6″ downrod.
Accessory downrods are available at additional cost in 12″, 18″, 24″, 36″, 48″, 60″, and 72″ lengths.
Airflow 6700 CFM, Energy usage is 85 Watts, Airflow efficiency is 78.8 CFM/Watt
– Fan with blades as shown in picture
– 3 1/2″ and 6″ downrods
– Halogen bulbs included – 2 X 50 Watt for uplight and 2 X 75 Watt for downlight
– Touch control wall switch for on/off, 3 fan speeds plus reverse, and independent dimmers for uplight and downlight
View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.
Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.
Please use this diagram as an approximate guide. Select optional downrods for 9 foot and higher ceilings.
This fan comes with 3 1/2 inch and 6 inch downrods included in the box. These downrods are suitable for 8 foot ceilings.
For safety reasons please be sure that the distance from the floor to the blades is at least 7 feet.
The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.
If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.