The Flyte ceiling fan (F531-BN) is featured in the permanent collection of the Chicago Athenaeum Museum of Architecture and Design and has won the GOOD DESIGN Award, one of the world’s most prestigious design awards. Design: Mark Gajewski, G Squared

×

FLYTE CEILING FAN SPECIFICATIONS:
56″ diameter blades
3 speeds; reversible
Integrated 100 watt mini-can halogen bulb, bulb included
Cap for non-light use included
Lifetime warranty on motor, 1 year on rest of fan
UL listed for indoor use
Sloped ceilings OK up to 30 degrees
Optional blades:
Fan comes with blade finishes as shown; optional blades available at additional cost include birdseye maple, mahogany, silver, and high gloss white

MODELS AVAILABLE:
F531-BN brushed nickel with birdseye maple blades
F531-BN/MG brushed nickel w/ mahogany with mahogany blades
F531-WH white with high gloss white blades

CONTROLS:
Wall mount touch control included – controls 3 speeds plus infinite dimmer for light; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending radio frequency signals to receiver in fan – no need for third wire when wiring for fan

DOWNRODS:
Fan comes standard with 9″ downlink—length to bottom of fan is 17 7/8″ with 9″ downrod.
Accessory downlinks are available at additional cost in 6″, 15″, 27″, 39″, 51″, 63″, and 75″ lengths.

ENERGY INFORMATION:
Airflow 6700 CFM, Energy usage is 69 Watts, Airflow efficiency is 97.1 CFM/Watt

Product PDF

×

- Fan with blades as shown in picture
– 9″ downbridge
– Removable light kit with bulb, 100 Watt halogen
– Matching cap for non-light use
– Touch control wall switch for on/off and 3 fan speeds

WCS213

×

Is your ceiling higher than 9ft?


View our diagram to find the downrod that matches your ceiling height.
Click here for downrods or scroll down this page.

This fan comes with optional accessories.


Such as sloped ceiling adapters, additional control units or additional blades.
Click here for accessories or scroll down this page.

Ready to checkout?


View Cart → Checkout →

×

What's in the box?

STEP 1: SELECT A FINISH

F531-L-BN
Brushed nickel with birdseye maple blades    $559.95
 
F531-L-BN/MG
Brushed nickel / mahogany with mahogany blades    $559.95
 
F531-L-WH
White with high gloss white blades    $519.95
 

Flyte
   
NOTE: Optional Light Included

The Flyte ceiling fan (F531-BN) is featured in the permanent collection of the Chicago Athenaeum Museum of Architecture and Design… MORE +

FLYTE CEILING FAN SPECIFICATIONS: 56" diameter blades 3 speeds; reversible Integrated 100 watt mini-can halogen bulb, bulb included Cap for… MORE +


STEP 2: SELECT DOWNROD FOR YOUR CEILING HEIGHT (?)

This fan comes standard with 9″ downlink—length to bottom of fan is 17 7/8″ with 9″ downrod.

Accessory downlinks are available at additional cost in 6″, 15″, 27″, 39″, 51″, 63″, and 75″ lengths.

Please select the 6″ optional downrod for ceilings heights from 8 ft. 3 in. to 9 ft.

Please contact us if you need assistance.

downrod_chart

STEP 3: SELECT ACCESSORIES (optional)

Remote Control

Hand Held Remote RCS213 - $28

The hand held remote will operate the fan independently of the wall switch or along with the wall switch. if you choose it the wall switch will not have to be installed.